Available a Free Live Product Demo
Book a free live product demo with a factory-trained member of our team. This is completely remote and is our way to safely replace in-person demonstrations. Throughout the demo session, we will showcase the Noritake product line you requested (For example, our touch TFT products below)
Video archives also available.
DVI & Touch Via USB. 5 Touch TFT Module for embedded monitor applications.
DVI & Touch Via USB. 7 Touch TFT Module for embedded monitor applications.
DVI & Touch Via USB. 10.1 (1280 x 800) Touch TFT Module for embedded monitor applications.
Part Number Resolution Display Size (inch) Display Area (mm) Operating Temp Weight (g) Power Interface Brightness Typ. (cd/m2) Online Shop Specification
GTWS070VHA00P 1024 x 600 7 154.21 x 85.92 -20°C to +70°C 233 5V / 930mA Digital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB) 850 N/A N/A
GTWV050VHB00P 800 x 480 5 108.00 x 64.80 -20°C to +70°C 105 5V / 530mA Digital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB) 810 Sample
GTWV070VHA00P 800 x 480 7 154.08 x 85.92 -20°C to +70°C 255 5V / 640mA Digital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB) 850 Sample N/A
GTWX101VHA00P 1280 x 800 10.1 216.96 x 135.60 -20°C to +60°C 550 5V / 1.5A Digital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB) 850 N/A N/A
GTWX101VHB00P 1280 x 800 10.1 216.96 x 135.60 -20°C to +60°C 550 5V / 1.5A Digital Visual Interface (DVI, using an HDMI type A connector), Touch Panel Control (UART, I2C, USB) 850 N/A N/A
1. "N/A" means "Not Available".
2. The specification table above are summarised information, so please confirm further details on the respective detail specification.
NOTE: The USB and HDMI connectors do NOT supply power to the display. Please apply 5V of constant power through the on-board power connector.
- GTWV050VHB00P’s power connector is a JST SM05B-GHS-TB (CN5).
- GT800X480A-1303P and GTWV070VHA00P’s power connector is a JST SM05B-GHS-TB (CN7).
- GTWX101VHA00P, GTWX101VHB00P and GT1280X800A-1303P’s power connector are a JST S5B-XH-A (CN2).
More videos available at our video showcase.
PC / SBC Ready
DVI (Digital Visual Interface) is transmitted to the GT-CP through an HDMI type-A connector. This connector accepts unencrypted digital video signal and outputs raw 24-bit pixel data to the display (HDCP not supported).
Touch is sent through HID compliant USB and I2C interfaces. No drivers necessary.
Touch Sensitivity and display brightness can be controlled by simple commands.
|Single/Multi Touch Mode||0x1F, 0x50, 0x01, [Mode]|
|Touch Panel Data Transmit||0x1F, 0x50, 0x20, [ON/OFF]|
|Touch Parameter Setting||0x1F, 0x4B, 0x70, [Op.],[Parameter]|
|Back-light Brightness||0x1F, 0x58, [Level]|
|Memory Switch Setting||0x1F, 0x28, 0x65, 0x03, [SW.],[Data]|
|Memory Switch Data Send||0x1F, 0x28, 0x65, 0x04, [SW.]|
|Prodcut Status Send||0x1F, 0x28, 0x65, 0x40, [Op.], [Parameter]|
For the details, please refer to the module’s respective specification.
Extended Display Identification Data (EDID) is supported to make Plug & Play (auto display settings) with the EDID supported device.
Touch via Serial Communication
Touch data can also be obtained through I2C and UART using the simple commands seen on the left. So, if USB communication cannot be achieved, any micro-controller with UART or I2C can read touch data and change the module’s settings. For more information, check the module’s respective full specification.
We are very aware of how important long-term support is for our customers and continue to strive to maintain strong supply chains with our GT products. Please refer to the Long Term Support Policy for more information.
No wait. you can purchase a sample from our Online Shop.
Your needs are locally supported. Our sales offices are located worldwide and committed to providing the guidance, tools and technical resources directly.
No Minimum Order Quantity (MOQ)
We accept and ship orders from 1 pc. Our warehouse in Chicago can ship our products to customer in US/CANADA/MEXICO.
Optimize your manufacturing process by letting us take care of your connector, cable, conformal coating, filter, and control board needs.
Check out the display commands and electrical requirements from the full specifications below.
This application note describes GT-VP module’s touch panel features, USB communication setting up guide, touch sensitivity reference, and more useful information. To install the GT-VP module into your application smoothly, please refer this document first.
GT-VP Communication on Linux
For USB communication, we have used libusb.h (an open source library) and a generic USB driver. This web-page describes these methods in detail and provides example code to get you started.
Software Development Support Tool
This guide shows solutions to frequently asked questions and common problems that users may encounter while using Noritake GT series modules.
The following contains our test results while testing the GT800X480A-1303P module. Actual results may vary with specific PC environments.
(HDMI Type A connector)
|Touch via USB||Command Execution via USB|
|Windows 7||The display works as a generic monitor. No driver required.||Touch works as a Human Interface Device (HID) compatible device and is recognized as a Digitizer or Mouse.||The latest WinUSB driver may be required.|
|Windows 8.1 and 10||The display works as a generic monitor. No driver required.||Touch works as a Human Interface Device (HID) compatible device and is recognized as a Digitizer or Mouse.||The module works with the generic WinUSB driver. No additional drivers required.|
|Raspberry Pi 3 with Raspbian, Ubuntu MATE||EDID is not supported. “hdmi_cvt 800 480 60 6 0 0 0” needs to be added to “/boot/config.txt” for pixel perfect display.||Touch works as a Human Interface Device (HID) compatible device and is recognized as a Digitizer or Mouse.||Need a USB communication library. Only libusb.h has been confirmed so far.|
|Raspberry Pi 4 with Raspberry Pi OS||The display works as a generic monitor. No driver required.||Need a USB communication library. Only libusb.h has been confirmed so far.|
If the screen is not displayed correctly, please try this configuration line in the Raspberry Pi’s config.txt file.
hdmi_cvt 800 480 60 6 0 0 0
Upon reboot, the video signal will have changed to fit the display’s resolution.
No additional video signal configuration lines are needed to create a pixel perfect image.
GT Product Features
FLETAS® Metallized Projective Capacitive Touch
Two metallized layers(x-y) are overlaid onto an LCD screen. These thin-film metallic panels have a lower impedance than typical ITO** touch panels. This allows for a higher S/N ratio, wider touch sense margin, and better overall sensitivity.
Learn more ►
** ITO = Indium Tin Oxide
Each module has a high brightness TFT ranging from 950-1000cd/m2*.
* Actual brightness range: 810-850cd/m2.
Variable projection radius. Tested up to 5mm acrylic and *15mm glass overlay without aﬀecting touch response under factory conditions.
Configure touch sensitivity by simple commands for your build with tolerance for gloved users and water interface.
Allow for gesture control and handles up to 10 concurrent touches at a time.
Glass surface is damage-resistant and tolerant to chemical cleaning solutions.